Make Perfect Yorkshire Puddings Every Time with this Traditional Recipe (2024)

FAQs

What is the secret to making Yorkshire puddings rise? ›

There is a secret to every Yorkshire pudding recipe when it comes to getting Yorkshire puddings to rise properly. In fact there are two. The first is to let the batter rest once you've mixed and the second is to heat your tin and beef dripping so it's piping hot when you do pour the batter in.

It was originally cooked in northern England over a fire with the meat roasting above it. The fats and juices from the meat would drip into the pudding and provide flavour and colour. Traditionally, the word “pudding” referred to homely and rustic desserts that were commonly eaten by the lower classes.

Traditionally in Yorkshire you would have the pudding as a starter to a Sunday roast (because they're cheap to make and filling so less meat is needed). Served with gravy. More regularly now small puddings are served with a roast. mint sauce is my favourite addition with lashings of marmite gravy.

A combination of milk and water gives the Yorkshire puddings extra rise and crispness.

If you want to go Instagram-ready with sky-high fluffy Yorkshires, add an extra egg white to your batter. They'll tower over the competition. With that in mind, always make sure your Yorkshire puddings have room to rise in the oven.

One of the main reasons why Yorkshires don't rise is because the oil isn't hot enough, so make sure it's bubbling and sizzling as you pour your batter in. Make sure you aren't over-filling the tin – fill each hole about a third or halfway up, any more and they may collapse through the weight of batter.

Well, from a very traditional viewpoint, Yorkshire puddings absolutely belong with roast beef, and a traditional British Christmas dinner normally involves a bird — goose, turkey, chicken, whatever — and you don't traditionally have Yorkshire puddings with any of those.

eaten in one siting is 400! Yikes, that's alot! We. suggest you start with one, try ours next time!

Put 2 teaspoons of vegetable oil into each compartment of two 4-hole Yorkshire pudding tins (see tip, below). If you only have one tin, you'll have to do this and cook the Yorkshires in two batches. Place the tin in the oven for 12-15 minutes to heat up the oil and tins until very hot (this is important for the rise).

I think everyone has or will make at least one flat Yorkshire pudding at some point. The most common reason is that it isn't hot enough. Sometimes because the oven door is open too long or the pan or fat isn't hot enough before the batter is added.

Why is my Yorkshire pudding soggy in the middle? ›

15-20 minutes should be enough time for smaller Yorkshire puddings but for larger ones you will need to increase the cooking time slightly to make sure that the pudding does not have a soggy centre.

Serve Yorkshire pudding with roast beef or pork, as this recipe requires meat drippings.

Resting the batter really does result in better-risen Yorkshire puddings with an airier texture (rather than chewy). About an hour is sufficient to allow the starch molecules to swell, giving a thicker consistency, and for the gluten to relax.

Plain flour is key, according to the Brits. The addition of bicarb or baking powder should not be added to the mix at all, and can even cause the puds to become flat, dense, or even burn.

What consistency should Yorkshire pudding mix be? For perfect Yorkies, you need a consistency of heavy cream, so really quite runny but not milk-runny. To make sure you achieve this I suggest pouring half of the liquid in and then slowly adding more until you reach the consistency.

The oven isn't getting hot enough (needs to maintain a 220C/425F temperature). Your oven loses heat too quickly when you open the oven door and/or you leave the oven door open for too long whilst you're filling up the Yorkshire pudding tins with batter. Too much batter or not enough fat in the tin.

Sometimes because the oven door is open too long or the pan or fat isn't hot enough before the batter is added. Sometimes it's because there is too much batter in the pan, sometimes because the pan is too large for the quantity of batter, and sometimes because the pan isn't deep enough.

A common fault that results in flat yorkshires is not having things hot enough. The oven needs to be very hot, and you need to use a metal dish with fat or oil that is hot enough to sizzle when you pour the mixture in. Get it straight into the oven and do not open the door for the duration of the cooking time.